Ever come across a cool vintage looking sign and wondered how you could make your own?
Well, today I’m going to show you an easy technique for How to Make a Vintage Sign.
First off you’ll need to gather your supplies:
Wood (new or salvaged)
Paints (various colors) & shellac (I used acrylic paint)
Sandpaper/masking or duct tape
Stencil (unless you freehand)
Start off by purchasing a piece of wood, dimensions for this project 12″x36″
You’ll want to prep your wood. This includes washing, sanding, etc. (If you’re using salvage wood, you’ll need to take necessary steps to keep yourself and other safe in case it contains lead based paint.)
At this point you can also use a hammer and other tools to make marks in your wood for more character. I chose to just start painting.
One thing I love about old signs is the layers of paint and color that show through. To create this effect you’ll want to layer on several different colors of paint.
I like to do this very messy so when I sand the finished product I have a lot of different variation in color coming through.
I painted my board white all over as a sort of base coat, and then added yellow, orange, red, green, and blue in patches throughout.
Next up is to stencil on your lettering.
There are many different ways to add lettering including various free handing & stenciling methods. I chose to cut out letters with my craft machine to create a stencil. Before I had my craft machine I would either purchase letters stencils at the craft store or print out my pattern on paper and cut them out to trace.
If your artistic and can free hand your own that is even better! I used a pencil to draw the letters on and then painted the letters white with a small paintbrush. Let the paint dry and add another layer of paint if necessary.
This doesn’t have to be perfect because you will be sanding the letters down so if you go out of the lines that’s okay! Make sure to let your board dry and cure before sanding. I recommend waiting 24 hours.
Once your final product is completely dry, you can start sanding to age the sign.
You can use an electric sander, but I prefer to do this by hand. It allows me more control with how the paint is wearing. If you don’t want to sand too much you can apply duct tape and rip it off for a nice worn texture.
When you’re finished, wipe down and/or vacuum excess paint dust and paint over with shellac.
Add hanging hardware on the back and there you have it!