Today we will show you how to create a DIY metal belt. It is very easy and simple to do.
1.First use a scissors to cut a strip of flashing to size.
2. Then place your flashing on a table with about 1cm along the length of it hanging over the side of the table. Using your fingers, push the metal down so it is flush with the corner of the table. Turn the metal over and push it down all the way down along the edge. Repeat this on the other long edge of the belt.
3.To finish the edges, cover with a towel and hammer lightly with the hammer along the edge so it is nice and flat. You can also place the belt between two phone books and hammer the edges to make sure it is finished well.